1Your vehicle
2Your goal
3Your plan
✓ 21,000+ vehicles · real fitment data

Find the audio upgrades that actually fit your car.

Pick your vehicle and I’ll build you a step-by-step upgrade path — the right signal, speaker sizes, bass, and amp for your exact setup, with the gear I’d actually buy.

Tested by us Exact speaker sizes No-hype picks

Start with your vehicle

Year → Make → Model → Audio Package. I’ll handle the rest.
Try a sample vehicle:
Built around your fitment
Speaker sizes, factory amp, and head-unit type pulled from your exact year, make, model, and audio package.
The gear I’d buy
Each step recommends a real product at your budget — with live pricing and the guide behind the pick.
Everything in one place
Buyer’s guides, hands-on reviews, and install how-tos tied to every step of your build.
Your vehicle

Two quick questions and your plan is ready.

This is how I tailor the picks and the budget — no long survey, I promise.

A What’s your goal?
B What’s your budget for the whole build?
C Who’s doing the install?
Vehicle Fit Guide › Toyota › 1999 4Runner
Your upgrade plan

1999 Toyota 4Runner

✓ Matched to your exact fitment Base / non-amplified Full system build · DIY

The 1999 Toyota 4Runner has all the ingredients for a serious build: a replaceable head unit, no factory amp fighting you, and enough cabin space to do everything right. The factory system is passive speakers off head-unit power — functional, nothing more. A full build here means new front 6.5s (component set, with the tweeter positioned in the A-pillar for real imaging), matching rear doors, a subwoofer in the cargo area in a proper enclosure, and an amplifier to power it all. The cargo area can accommodate a real enclosure without giving up much usable space if the build is planned carefully — a ported or sealed box built to the sub's specs sits cleanly against the rear of the cargo floor. This is the right vehicle to do it all at once. Each step in this guide walks through the specifics.

Your build · Best tier
1Head Unit$1,499.99
2Speakers$589.00
3Bass — custom enclosure$749.99
4Amp — All-around$699.00
Est. total$3,538
Buy in any order — each step stands alone
Budget — picks re-flow
Factory configuration
Head unit: Single/Double DIN
Factory amp: No
Front speakers: 6.5" + tweeter
Bass: None
What fits
Front: 2 locations · Rear: 1 location
LocationSize
Door6.5
Door1

The upgrade path

4 steps · ordered by impact · with DIY difficulty
1
Head Unit★ Start hereModerate installTouchscreen · fits double-DIN
Swap for control + features

A direct single- or double-DIN swap is the right starting point for a full system build. The factory head unit's low preamp output is a bottleneck for everything downstream — a quality aftermarket unit with strong RCA voltage gives your amp a better signal to work with, which translates directly to lower noise and better dynamic range from your speakers. For a full build, look for a head unit with dedicated front, rear, and subwoofer preamp outputs so you can connect each zone of the amp independently. Since there's no factory amplifier in your 1999 Toyota 4Runner, the signal path is straightforward — RCA out from the head unit, straight to the amp inputs. Get this step right and the rest of the chain benefits.

Best OverallPioneer DMH-WT8600NEX
Pioneer DMH-WT8600NEX
★★★★⯨4.7 · CarAudioNow tested
✓ Double-DIN — direct fit

Why it’s the pick: When maximum screen real estate is the goal, the DMH-WT8600NEX is my go-to — the oversized floating panel and crisp capacitive glass put a tablet-sized display in almost any dash.…

Buy where it’s cheapest
Amazon$1,499.99LowestCrutchfield$1,499.99
$1,499.99live lowest
Buy on Amazon ↗
2
SpeakersModerate install6.5″
Upgrade the front stage first

For a full system build in the 1999 Toyota 4Runner, the speaker step means every zone — front and rear — in one pass. The front doors take 6.5-inch speakers with a separate 1-inch tweeter position; that's a component set opening, and components belong there on a premium build. Component sets handle the tweeter crossover separately, which gives you better soundstage imaging than a coax alternative. With no factory amplifier, these speakers will live off head-unit power until the amp step — wire them cleanly and keep gain low until the amp is in. The rear 5.25s get replaced now too: on a full system build, the rears are part of the cabinet, not an afterthought. A consistent speaker quality across all zones is what makes the system sound cohesive rather than front-heavy. See the Best Car Speakers by Size guide for options in both sizes.

Best Overall 6.5″ ComponentFocal PS 165 FXE
Focal PS 165 FXE
★★★★⯨4.8 · CarAudioNow tested
✓ 6.5" — fits your front doors

Why it’s the pick: Part of Focal’s Flax Evo line, the PS 165 FXE blends a natural-sounding flax cone with a refined tweeter and a robust crossover. It’s a set I’ve covered hands-on in my unbox &…

Buy where it’s cheapest
Amazon$589.00LowestCrutchfield$789.99
$589.00live lowest
Buy on Amazon ↗
3
BassModerate install8″
Add a compact sub

No factory subwoofer means the 1999 Toyota 4Runner's current low end is a blank slate — nothing to upgrade around, just room to build it right. On a premium full-system build, that means a proper component subwoofer, a custom enclosure spec'd to that driver and built to fit the 1999 Toyota 4Runner's cargo area, and an amplifier with a dedicated mono channel to power the sub correctly. The enclosure is not optional — a sub in the wrong box, or a pre-fab enclosure that doesn't match the driver's specs, will underperform no matter what you spend on the driver. Get the sub, pick the enclosure design (sealed for tight accurate bass, ported if you want more output), build it to spec, and mount it cleanly in the cargo area. Done right, the 1999 Toyota 4Runner will have real bottom end.

📦 All-in-one
Amp + sub + box in one. Easiest.
🪑 Slim / tight space
Shallow sub for tight spaces.
🛠️ Component
Component sub + box + amp. Most output.
Best OverallJL Audio W7AE
JL Audio W7AE
★★★★⯨4.9 · CarAudioNow tested
✓ Compact — trunk friendly

Why it’s the pick: JL’s W7 has been the reference standard for two decades because it blends control and command: deep extension without bloat, slam without smear. Its W-Cone assembly and OverRoll s…

Buy where it’s cheapest
Amazon$749.99LowestCrutchfield$899.99
$749.99live lowest
Buy on Amazon ↗
4
AmplifierAdvanced install4-ch · 125W×4
Power the front stage

For a full system build, the amplifier is what makes every other component perform at its potential. Your 1999 Toyota 4Runner has no factory amp, so you're starting fresh — and at a premium budget, that's an opportunity to do it right from the start. Size the amp (or amps) to the full channel count: one channel per speaker, plus a mono channel for the sub. A multi-channel amp that handles all the speaker channels plus a separate mono sub amp is a common and clean configuration. Run dedicated power and ground cables properly — undersized wiring is a common point where premium builds give up performance. Set gains with a multimeter or oscilloscope, not by ear.

🎚️ All-around
Full-range power & control
🪶 Compact & slim
Tight, hidden installs
🔊 Subwoofer amp
Dedicated bass power
Best Built-In DSPAudioControl D-Series
AudioControl D-Series
★★★★⯨4.7 · CarAudioNow tested
✓ Powers your new components

Why it’s the pick: If you’re keeping the factory head unit or a factory-amplified system, the D-Series makes life easy. Active speaker-level inputs and signal summing handle odd factory crossovers,…

Buy where it’s cheapest
Crutchfield$699.00Lowest
$699.00live lowest
Buy on Crutchfield ↗

1999 Toyota 4Runner audio — common questions

What size speakers fit a 1999 Toyota 4Runner?

The 1999 Toyota 4Runner uses 6.5" + tweeter front speakers and 5.25" rear speakers.

Does the 1999 Toyota 4Runner have a factory amplifier?

No factory amp — the 1999 Toyota 4Runner drives its speakers off the head unit, so adding a compact 4-channel amp later gives the new speakers clean, properly rated power.

What is the best subwoofer setup for a 1999 Toyota 4Runner?

Use the cargo area — an all-in-one powered sub is the easiest big win, or a sealed/ported enclosure for more output.

What head unit fits a 1999 Toyota 4Runner?

The 1999 Toyota 4Runner has a Single/Double DIN head unit (Replaceable — direct swap), so a matching aftermarket receiver fits with the correct dash kit and harness.

Before you buy

Fitment is a guide, not a guarantee. Speaker sizes and fit details are based on your selected year, make, model, and audio package and can vary by trim, options, and prior modifications — always confirm before buying.

Your plan is guidance built from your selections (vehicle, goal, budget), not a guarantee of fit, sound, or results, and not a substitute for professional installation advice. Prices are pulled from retailers and may change at checkout.

CarAudioNow is reader-supported — some links are affiliate links and we may earn a commission at no extra cost to you. See our FTC disclosure and privacy policy.

Buy in any order — each step stands on its own.
DMCA.com Protection Status      © 2026 CarAudioNow.com
CarAudioNow Logo Refined

Enthusiasts! Get Your Monthly Dose of Car Audio!

Sign up for our monthly dose of automotive and marine audio news, custom installs and insightful product reviews!