Last updated on January 20th, 2021 at 01:12 am
Chuanganzhuo backup camera and monitor kit can give you the ability to see the tiniest critters sneaking behind your car. No more straining your neck to see if a shopper is trying to whiz by you or making sure the opposite car isn't pulling out. The waterproof camera also equipped with built in IR sensor vision for night time.Camera attaches directly to license plate for easy installation. The LCD monitor fits conveniently on your dashboard.
The monitor acts as a normal rear view mirror, and reflector will automatically appears when the monitor is turned off. So you can clip it over your original mirror, and the rear view image will appear on the screen automatically when reversing the car.so this is multi function mirror monitor.
Super Night Vision
Built-in 7 infrared lights automatically turns on when it detect dark environment which effectively help you park even during the night.
Easy to Install
- Attach camera to license plate.
- Get power to camera:
- Connect Red wire of the camera power wire to reverse light(+) and black wire to any metal ground screw or reverse light(-).
- Attach red wire of video cable to same power source(reverse light+) as in step 2.
- Plug video cable into camera and route it to front of car and up onto dash.
- Clip the monitor on the original mirror, plug video cable into white AV2 video connector(support reversing priority), plug power cable into it.
- Get power to monitor:
- Attach red monitor power wire to red wire on video cable attach black monitor power wire to ground.
- Test system.
Tips: The red wires on the long video (yellow) cable are extra power wires runs inside the video cable.It's purpose is- if you power easily in the rear from the reverse lights, you can get you power from the rear and use this to bring it to the front.Conversely, you also can get you power in the front and use this to bring it to the rear.
4.3″ Car Vehicle Rearview Mirror Monitor
1.Screen size:4.3 inch (diagonal length)
2.Aspect Ratio :16:9 image
3.System: PAL & NTSC auto-switching
4.Resolution:480(W) x 272(H)
5.Power supply:DC 12 V
7.Sunshade design around
8.switch function stand
9.Suitable for camera DVD/VCD player
License Plate Car Rear Backup Parking Camera
Image sensor: PC7070
Resolution:420 TV line
S/N Radio: better than 48db
Video output: RCA connector, 1.0vp-p,750hm
Power: DC 12 V
Waterproof grade: IP67(only proof little ran)
1 x 4.3 inch TFT LCD Monitor;
1 x Camera;
2 x Power Cable;
1 x Video Cable ;
1 x English User Manual