This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool – it’s completely waterproof. This 4-channel, 1000-watt bridgeable marine amp takes both high and low level inputs, so it’s compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. Blue LED level display lets you keep an eye on your signal. For protection, count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool–it's completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
The PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.
Input Level Control
Adjust the line level input for the least amount of distortion to match your source unit.
Add a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.
High- and Low-Pass Filters
Optimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.
Crossover Mode Selector
Route the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.
Protect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.
Pyle PLMRA420 Select Specifications
|Power Rating:||250 Watts x 4 Maximum Output at 4 ohms|
35 Watts x 4 RMS at 4 ohms
50 Watts x 4 RMS at 2 ohms
|S/N Ratio:||> 95dB|
|Power Supply Voltage:||14.4V DC Neg. Ground (10.5-16V)|
|Frequency Response:||15 Hz-30 KHz|
|Input Impedance:||Low Level: 10K Ohms|
High Level: 100 Ohms
|Input Sensitivity:||Low Level: 250mV|
High Level: 2.5V
|Dimensions:||10.9 x 2.7 x 12 Inches (L x W x H)|
What's in the Box
Pyle PLMRA420 Amplifier, Mounting Hardware, User's Manual
Dual Variable High/low Electronic Crossover & Bass Boost
Power On Led Indicator
Led Protection Indicator
Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
Variable high- and low-pass filters with crossover mode selector
High-level MOLEX and gold-plated low-level RCA inputs with adjustable input level
Overload, Short Circuit, and Thermal protection with LED indicator
Variable bass boost of up to 18dB at 60Hz
Pyle PLMRA420 Manual
4 Channel 1000 Watt Waterproof Marine This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool -- it's completely waterproof.
Review and un-boxing of The Pyle Marine Amplifier PLMRA400 4 Channel 400 Watt amp
best priced amp ever - PYLE PLMRA400 4 Channel 400 Watt Waterproof Marine Amplifier In the US Amazon.com https://amzn.to/2KrQH82 in Canada ...
MCM Speakers & Pyle bluetooth 1000 watt amp
via YouTube Capture.
Best PLMRA420 4 Channel Waterproof Bridgeable Amplifier
http://bit.ly/1pH3cyO Best PLMRA420 4 Channel Waterproof Bridgeable Amplifier PYLE PLMRA420 4-Channel 1000-Watt Waterproof Marine Bridgeable ...