Best 6.5″ Coaxial Car Speaker Review
Upgrading your car’s factory speakers with of the Best Coaxial Car Speakers will give new life to your daily driving. Coaxial speakers combine the woofer and the tweeter onto the same axis. They are a combo package. This allows the projection of a full range of sound and frequencies from one speaker. They’re easier to install and easier to wire, you can even place coaxial speakers in place of components if you’d like. This type of speaker is arguably the most popular speakers on the market. If you don’t know the difference between a coaxial and component speaker and would like to learn more, click here to for more information.
# 1. JL Audio C5-650x (CarAudioNow’s Best 6.5″ Coaxial Car Speaker)
# 2. Hertz HCX 165
# 4. Alpine SPR-60
# 5. Rockford Fosgate Power T1675
# 6. Polk Audio DB651
Best Car Speakers: Common Speaker Terms & Ratings (What to Look For)
When comparing and choosing the Best 6.5″ Coaxial Car Speakers on today’s market, CarAudioNow takes into consideration several key criteria: Lets define a few common criteria and terms that are compared when rating a speaker:
Power Handling: Power handling is the measurement a manufacture gives to rate how much power a speaker can handle and operate at. It is given by two measurements, RMS and Peak (or MAX). RMS Power rating is the amount of power the speaker handles continuously, while the Peak Power rating is the amount of power a speaker can handle in short bursts. When comparing speakers, RMS Power is the more relevant and important rating to look at.
Sensitivity: The speaker sensitivity rating is a measurement of the amount of sound the speaker will emit from the power it’s given. The higher the sensitivity, the more efficient the speaker is with the power it’s given. For lower powered systems, you want a higher sensitivity rating. For a higher powered system, you want a lower sensitivity rating. Lower sensitivity rated speakers are meant to handle higher power.
Frequency Range: Frequency range is the frequencies that the speaker emits sound at, measure in Hz. Normally they are given from a low frequency to high, for example: 20 – 22,000 (22k) Hz. This measure how low and high the speaker can actually emit sound at.
Speaker Design and Materials
Woofer: The speaker woofer can determine the responsiveness, and quality of the speaker. The stiffer and more lightweight the material used, the more effective the speaker is. Polypropylene is a very common material used for the cone, as well as woven fabrics such as kevlar. Aluminum and titanium are also used in higher end speakers.
Woofer Surrounding: The woofer surround also is an important aspect of the speaker system and effect the sound as well. Durable, lightweight, and free moving materials are used to allow the woofer to move with as little energy possible. The material is essential for a long lasting and performing speaker too. As speakers get older and used, humidity levels and wear-and-tear can crack and even break the surrounding of the woofer. Rubber surrounding is typically the most long lasting an high performing material. Foam an cloth surroundings are found on less expensive component speakers, with lower performance and shorter life spans.
Crossovers: When you purchase a component car speaker system, a crossover is almost always a part of the package. External crossovers are typically used to lessen the amount of distortion a speaker might have by separating the frequency inputs. Signals can cross through coated wiring and cause distortion, so an external crossover system will limit this.